PITCHING MACHINES
If there is a pitching machine you are looking for and do not see it below, please either call or email us. We also sell parts for almost every pitching machine on the market.
We accept Purchase Orders! We also offer the machines as a 220V for out of the country use.
****SH is to the main 48 states****
We accept Purchase Orders! We also offer the machines as a 220V for out of the country use.
****SH is to the main 48 states****
Elite Hack Pitching Machine - $11,499.00 w/ FREE SH (Main 48 states) - SALE PROMO PRICE
Same Quality features as the Hack Attack, but now fully programmable!
****Find a cheaper price anywhere else and we will beat it!!!!!!
Interface
·Oversized 12” touch screen monitor allows for quick navigation through our extremely user-friendly software.
·Pitches can be accessed via standard default pitch selection, favorite pitches, favorite sequences or create your own using the manual mode.
Standard (pre-set/default) Pitches
·For quick, simple operation, there are eight standard pitches instantly accessible (fastball, change-up, heater, split finger, curveball right & left and slider right and left).
·Customize the speed and spin of any standard pitch to meet the requirement of any drill or the skill of any hitter.
·Modify the location of any standard pitch in the strike zone or enlarged strike zone (two strike count).
·Rely on pre-set pitches or go immediately to manual mode where you select any pitch, speed and location, which can repeat or change as desired.
Manual Mode
·In the manual mode the machine functions as a basic Hack Attack providing you access to each motor and allowing you to develop each desired pitch.
·Individual pitches or sequences can be saved to favorites for instant access at any time.
·Between pitches the location can adjusted instantly using arrows on the screen.
Favorite Pitches
·Once you have fine-tuned a pitch you would like to access later, you can save it to your favorites from either the manual mode or standard pitches screens.
·You can save up 20 pitches to your favorites file, providing you with a full range of pitches that you can immediately access in any order at any time.
·From the favorites screen you can also alter the spin, speed and location of that pitch and resave it as a favorite.
·Also on the favorites screen there is a ‘last pitch’ option that will call up the last pitch you were throwing before the machine was powered down so you can instantly continue where you left off.
Favorite Sequences
·A sequence of pitches (up to 10 per sequence) can be quickly saved and accessed on your favorite sequences screen so you can challenge the mechanics of any hitter or replicate a specific pitcher.
·There are four different run types for every sequence; ‘auto’ will select the pitches in the order you saved them once, ‘repeat’ will continuously pitch the sequence in order, ‘random’ will randomize the list, ‘manual’ selection allows you to change the order as desired.
·For initial set-up, center pitch in the middle of the plate and the horizontal pitch locators in a centered position, then throw a pitch to get elevation. You are now set to position your pitch locators to establish repeatability or to set-up a change of location with each pitch.
·When the pitch locators are released, it allows for free movement of the throwing head for all fungo work, like line drives and fly balls.
Utilities and Settings
·Within settings you can select the skill level of pitches you want for the standard pitches, either adult or youth.
·Simple adjustments of changing speed from MPH to KMH, language selection, auto shut-down time, as well as buzzer volume and screen brightness adjustments are also made here.
·A screen lock-out option is available in setting that will allow you to establish a password in order to access the machine operations.
·Machine diagnostics and error code definition is located in utilities.
·Any update to the software is made in utilities and will be downloaded from the SA site.
·In utilities there will be a counter that tracks the number of pitches thrown by the machine during the life of the unit.
Same Quality features as the Hack Attack, but now fully programmable!
****Find a cheaper price anywhere else and we will beat it!!!!!!
Interface
·Oversized 12” touch screen monitor allows for quick navigation through our extremely user-friendly software.
·Pitches can be accessed via standard default pitch selection, favorite pitches, favorite sequences or create your own using the manual mode.
Standard (pre-set/default) Pitches
·For quick, simple operation, there are eight standard pitches instantly accessible (fastball, change-up, heater, split finger, curveball right & left and slider right and left).
·Customize the speed and spin of any standard pitch to meet the requirement of any drill or the skill of any hitter.
·Modify the location of any standard pitch in the strike zone or enlarged strike zone (two strike count).
·Rely on pre-set pitches or go immediately to manual mode where you select any pitch, speed and location, which can repeat or change as desired.
Manual Mode
·In the manual mode the machine functions as a basic Hack Attack providing you access to each motor and allowing you to develop each desired pitch.
·Individual pitches or sequences can be saved to favorites for instant access at any time.
·Between pitches the location can adjusted instantly using arrows on the screen.
Favorite Pitches
·Once you have fine-tuned a pitch you would like to access later, you can save it to your favorites from either the manual mode or standard pitches screens.
·You can save up 20 pitches to your favorites file, providing you with a full range of pitches that you can immediately access in any order at any time.
·From the favorites screen you can also alter the spin, speed and location of that pitch and resave it as a favorite.
·Also on the favorites screen there is a ‘last pitch’ option that will call up the last pitch you were throwing before the machine was powered down so you can instantly continue where you left off.
Favorite Sequences
·A sequence of pitches (up to 10 per sequence) can be quickly saved and accessed on your favorite sequences screen so you can challenge the mechanics of any hitter or replicate a specific pitcher.
·There are four different run types for every sequence; ‘auto’ will select the pitches in the order you saved them once, ‘repeat’ will continuously pitch the sequence in order, ‘random’ will randomize the list, ‘manual’ selection allows you to change the order as desired.
·For initial set-up, center pitch in the middle of the plate and the horizontal pitch locators in a centered position, then throw a pitch to get elevation. You are now set to position your pitch locators to establish repeatability or to set-up a change of location with each pitch.
·When the pitch locators are released, it allows for free movement of the throwing head for all fungo work, like line drives and fly balls.
Utilities and Settings
·Within settings you can select the skill level of pitches you want for the standard pitches, either adult or youth.
·Simple adjustments of changing speed from MPH to KMH, language selection, auto shut-down time, as well as buzzer volume and screen brightness adjustments are also made here.
·A screen lock-out option is available in setting that will allow you to establish a password in order to access the machine operations.
·Machine diagnostics and error code definition is located in utilities.
·Any update to the software is made in utilities and will be downloaded from the SA site.
·In utilities there will be a counter that tracks the number of pitches thrown by the machine during the life of the unit.
|
I-Hack Attack Baseball or Softball - $4399 w/ FREE shipping to main 48 statesTouch Screen InterfaceWith the familiar look and feel of a personal tablet, the machine interface is a customized touch screen through which you can control and select pitch type, speed and spin as well as access saved favorite pitches and sequences.
Advanced Software Program
Pitch Locators
Favorite Pitches and Sequences Saved
|
Hack Attack Baseball or Softball Pitching Machine
$3400.00 - SALE PROMO SPECIAL
FREE SH (Main 48 states)
****Find a cheaper price anywhere else and we will beat it!!!!!!
Contact us directly for special discounts
With the three-wheel design on the Hack Attack, you can see the ball clearly all the way through the feeding motion, acceleration and release, just like a live pitcher. The hitter sees when to stride and the angle of the release, giving him an actual live-arm sense of timing and location. With a quick turn of the dials, you can effortlessly throw major league fastballs, right and left handed breaking pitches including curve balls, sliders, split finger and knuckle. The three wheel design changes the breaking pitch plane by simply adjusting wheel speed dials. (All two wheel units require time consuming awkward throwing head adjustments to change from fastballs to curve balls or right to left handed breaking pitches). The elevation adjustment handle will raise or lower the pitch. With a simple turn, you can even move the pitch up or down within the strike zone between pitches. Throwing head pivots instantly in any direction for all fungo work including deep fly balls that can drive fielders to the fence, slicing line drives, catchers pop-ups with reverse spin, towering infield pop ups and grounders.
These are the NEW models that come with the horizontal inside/outside pitch adjustment handles.
100+ MPH at 60'6''
Vinyl Cover
Jr. Hack Attack Baseball or Softball Pitching Machine
$2500.00 - SALE PROMO SPECIAL
FREE SH (Main 48 states)
****Find a cheaper price anywhere else and we will beat it!!!!!!
Contact us directly for special discounts
With the three-wheel design, the Jr. Hack Attack allows you to see the ball clearly all the way through the feeding motion, acceleration and release, just like a live pitcher. The hitter sees when to stride and the angle of the release, giving him an actual live-arm sense of timing and location. With a quick turn of the dials, you can effortlessly throw major league fastballs, right and left handed breaking pitches including curve balls, sliders, split finger and knuckle. The three wheel design changes the breaking pitch plane by simply adjusting wheel speed dials. (All two wheel units require time consuming awkward throwing head adjustments to change from fastballs to curve balls or right to left handed breaking pitches). The elevation adjustment handle will raise or lower the pitch. With a simple turn, you can even move the pitch up or down within the strike zone between pitches. Throwing head pivots instantly in any direction for all fungo work including deep fly balls that can drive fielders to the fence, slicing line drives, catchers pop-ups with reverse spin, towering infield pop ups and grounders.
These are the NEW models that come with the horizontal inside/outside pitch adjustment handles.
*** Longer legs can be purchased for this machine. Takes the release point to the standard height like the Hack Attack to allow machine to throw over a standard L screen.
70+ MPH at 60'6''
$2500.00 - SALE PROMO SPECIAL
FREE SH (Main 48 states)
****Find a cheaper price anywhere else and we will beat it!!!!!!
Contact us directly for special discounts
With the three-wheel design, the Jr. Hack Attack allows you to see the ball clearly all the way through the feeding motion, acceleration and release, just like a live pitcher. The hitter sees when to stride and the angle of the release, giving him an actual live-arm sense of timing and location. With a quick turn of the dials, you can effortlessly throw major league fastballs, right and left handed breaking pitches including curve balls, sliders, split finger and knuckle. The three wheel design changes the breaking pitch plane by simply adjusting wheel speed dials. (All two wheel units require time consuming awkward throwing head adjustments to change from fastballs to curve balls or right to left handed breaking pitches). The elevation adjustment handle will raise or lower the pitch. With a simple turn, you can even move the pitch up or down within the strike zone between pitches. Throwing head pivots instantly in any direction for all fungo work including deep fly balls that can drive fielders to the fence, slicing line drives, catchers pop-ups with reverse spin, towering infield pop ups and grounders.
These are the NEW models that come with the horizontal inside/outside pitch adjustment handles.
*** Longer legs can be purchased for this machine. Takes the release point to the standard height like the Hack Attack to allow machine to throw over a standard L screen.
70+ MPH at 60'6''
|
|
Takes Release point from 43'' to 53''
Vinyl Cover |
Hack Attack/Jr. Hack Attack Fungo Legs
Set of 3 legs with solid, heavy-duty casters for the Hack Attack or Jr. Hack Attack Baseball Pitching Machine. Allows for ease of maneuverability around the field during fungo training.
|
Hack Attack/Jr. Hack Attack Replacement Motor
|
Hack Attack/Jr. Hack Attack Speed Control Panel
|
Hack Attack/Jr. Hack Attack Throwing Wheel(s)
|
Team Feeder
$2499.00 w/ FREE SH (Main 48 states) The 150 baseball or 75 softball capacity Team Feeder will feed a baseball into the Hack Attack or Junior every 6.5 seconds for continuous hitting time of 20 minutes. Feeds the E Hack Attack, Hack Attack and Junior Hack Attack. (Please specify which machine it will be used with at time of order). |
Solo Feeder
$599.00 w/ FREE SH (Main 48 states) Extremely portable 15 baseball or 11 softball capacity Solo Feeder provides adjustable intervals between pitches. Feeds both the Hack Attack and Junior Hack Attack. (Please specify which machine it will be used with at time of order). |
M3 Pitching Machine - FREE SH to the main 48 states
Introducing the new M3 offensive pitching machine from ATEC Sports. Built to train professional level ballplayers. It's industry leading 3-wheel design allows for hitters to have complete visibility of the ball throughout the entire pitch cycle, which improves their timing and increases their pitch recognition. With the addition of a third wheel; speed, accuracy, and spin are maximized due to the ball’s increased surface contact with the wheels. The M3 is equipped to throw 105mph giving you the ability to train against Major League level fastballs, and right and left handed breaking pitches including curveballs, sliders, and splitters. Using only the speed control knobs, pitches can be easily dialed-in without making any physical adjustments to the machine, helping you improve the efficiency and effectiveness of your batting practice. Built for the MLB, available now.
Iron Mike MP4 & MP6
Hopper Fed arm style machine. Holds up to 600 baseballs or 400 softballs. Comes with a built in low voltage remote and runs off a standard 110V socket. Great for all ages. Comes with plates so you can bolt machine to floor and lock it in place.
MP4 style is same as MP6, just has extra reinforced bars and a positive feed chute to ensure seam balls travel down track. Positive free chute can be added to the MP6. **Optional cover if needed** |
Iron Mike MP5
Ball rack fed arm style machine. Holds up to 38 baseballs or 28 softballs. Comes with built in low voltage remote and runs off a standard 110V socket. Great for all ages. Optional positive feed chute to ensure seam balls travel down track.
**Optional cover if needed** |
We also offer Atec and Jugs pitching machines. Please either call or email for pricing.
|
Power Hummer
|
Atec Rookie
|
|
Mailing Address:
Chase Sports Specialist
7650 S. McClintock Dr.
Suite 103-422
Tempe, AZ 85284
Licensed – Bonded – Insured ROC# 281995
Ph: 602-574-6512 / 480-893-7940
Email: chasesports@cox.net
Web: www.chasesportsspecialist.com
Chase Sports Specialist
7650 S. McClintock Dr.
Suite 103-422
Tempe, AZ 85284
Licensed – Bonded – Insured ROC# 281995
Ph: 602-574-6512 / 480-893-7940
Email: chasesports@cox.net
Web: www.chasesportsspecialist.com